VOLVO
ECM-7600 - Immobilizer. Faulty signal
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
7 ModelleC30 (2007–2013), S40 (2004–2013), S60 (2001–2009), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (13)
- Volvo C30 (2007–2013)2007–2008, 2010–2011Nur Motor: D4164T
- Volvo S40 (2004–2013)2005–2008, 2010–2011Nur Motor: D4164T
- Volvo S60 (2001–2009)2006Nur Motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo S60 (2001–2009)2007–2009Nur Motor: D5244T4, D5244T5, D5244T7
- Volvo V50 (2004–2013)2005–2008, 2010–2011Nur Motor: D4164T
- Volvo V70 (2000–2008)2006Nur Motor: D5244T4, D5244T5, D5244T6, D5244T7
- Volvo V70 (2000–2008)2007Nur Motor: D5244T4, D5244T5, D5244T7
- Volvo V70 (2000–2008)2008Nur Motor: D5244T5, D5244T7
- Volvo V70 XC / XC70 (2001–2007)2006–2007Nur Motor: D5244T4
- Volvo XC90 (2003–)2006–2007Nur Motor: D5244T4
- Volvo XC90 (2003–)2008–2010Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2011Nur Motor: D5244T18, D5244T4, D5244T5
- Volvo XC90 (2003–)2012Alle Motoren außer: B5254T2, B6324S5
Was bedeutet der Fehlercode?
The engine control module (ECM) checks the immobilizer code against the central electronic module (CEM) before the engine is allowed to start. If the code is missing or wrong, the fault code is set and the engine does not start. The fault applies to the C30, S40 (04-), S60 (-09), V50, V70, V70 XC and XC90.
Mögliche Ursachen
- Wrong ignition key
- Low battery voltage
- Poor plug contact or corrosion at the ECM connector
- Open circuit or short to ground in the power supply to the ECM
- Open circuit in the CAN wiring
Was Sie tun können
- 1Check that you are using the correct ignition key, and try another key if you have one
- 2Check that the battery voltage is normal and charge the battery if needed
- 3Check that the connector to the engine control module is secure and free from corrosion
- 4Check that the fuses for the engine control module are intact
- 5If the fault remains, have a workshop check the power supply and the CAN wiring to the engine control module
Symptome, die Sie bemerken können1
- The engine does not start, sometimes or all the time
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.