VOLVO
ECM-7610 - Immobilizer. Faulty signal
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (16)
- Volvo C30 (2007–2013)2007Nur Motor: D4164T, D5244T8, D5244T9
- Volvo C30 (2007–2013)2008, 2010Nur Motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo C30 (2007–2013)2009Nur Motor: D5244T13, D5244T8, D5244T9
- Volvo C30 (2007–2013)2011Nur Motor: D4164T
- Volvo C70 (2006–2013)2007Nur Motor: D5244T8, D5244T9
- Volvo C70 (2006–2013)2008–2010Nur Motor: D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2005, 2011Nur Motor: D4164T
- Volvo S40 (2004–2013)2006Nur Motor: D4164T, D5244T8
- Volvo S40 (2004–2013)2007Nur Motor: D4164T, D5244T8, D5244T9
- Volvo S40 (2004–2013)2008, 2010Nur Motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo S40 (2004–2013)2009Nur Motor: D5244T13, D5244T8, D5244T9
- Volvo V50 (2004–2013)2005, 2011Nur Motor: D4164T
- Volvo V50 (2004–2013)2006Nur Motor: D4164T, D5244T8
- Volvo V50 (2004–2013)2007Nur Motor: D4164T, D5244T8, D5244T9
- Volvo V50 (2004–2013)2008, 2010Nur Motor: D4164T, D5244T13, D5244T8, D5244T9
- Volvo V50 (2004–2013)2009Nur Motor: D5244T13, D5244T8, D5244T9
Was bedeutet der Fehlercode?
Before allowing the engine to start, the ECM compares the vehicle serial number kept in the BCM. If the serial number is missing or does not match, the fault code is set and the engine does not start. The fault applies to the C30, C70 (06-), S40 (04-) and V50.
Mögliche Ursachen
- Wrong ignition key
- Low battery voltage
- Plug at the ECM is loose, or contacts are corroded
- A break or noise on the link between the CEM and the ECM
- Faulty CAN communication
Was Sie tun können
- 1Check that you are using the correct ignition key and that the battery voltage is normal
- 2Check that the connectors to the engine control module are secure and free from contact resistance and oxidation
- 3Read and note the code, clear it and road test to see whether it returns
- 4Work on the brake control module (BCM) should be done by a workshop, as it controls the braking system
- 5If the fault remains, have a workshop with diagnostic equipment compare the serial numbers in the brake control module and the engine control module
Symptome, die Sie bemerken können1
- The engine does not start, sometimes or all the time
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.