VOLVO
ECM-801C - System relay. Signal too high
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2007Nur Motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Nur Motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Nur Motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo S40 (2004–2013)2008Nur Motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Nur Motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Nur Motor: B5254T7
Was bedeutet der Fehlercode?
The engine control module registers that the voltage on the system relay signal wire is too high. The cause may be a signal wire shorted to supply voltage or a damaged system relay, and the engine then does not start.
Mögliche Ursachen
- Signal wire shorted to supply voltage
- Damaged system relay
Was Sie tun können
- 1Read and note the code, clear it and road test to see whether it returns
- 2Inspect the signal wire to the system relay where it may have touched a live wire, and check for chafing and pinching
- 3Using a multimeter, check that the signal wire does not carry voltage where it should not
- 4If no fault is found, have a workshop try a new system relay
Symptome, die Sie bemerken können1
- The engine does not start
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.