Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-8020
    VOLVO

    ECM-8020 - Battery relay. Temperature too high

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    3 Modelle

    C30 (2007–2013), S40 (2004–2013), V50 (2004–2013)

    Modelle nach Baujahr und Motor anzeigen (3)
    • Volvo C30 (2007–2013)2010–2011Nur Motor: D4164T
    • Volvo S40 (2004–2013)2010–2011Nur Motor: D4164T
    • Volvo V50 (2004–2013)2010–2011Nur Motor: D4164T

    Was bedeutet der Fehlercode?

    The battery relay disconnects the battery and starter circuit from the rest of the electrical system when the engine is restarted after an auto-stop, and the engine control module monitors it. The too-high temperature fault is probably caused by an overload in the battery relay. While the fault is active, automatic start and stop of the engine does not work. The fault applies to the C30, S40 (04-) and V50.

    Mögliche Ursachen

    • Loose connection or oxidation in the connector
    • Short circuit in the connections
    • Damaged battery relay

    Was Sie tun können

    1. 1Check that the fuses are intact
    2. 2Try the automatic start and stop function at idle to see whether it works
    3. 3Check the connections at the battery and the battery relay for looseness, contact resistance and oxidation
    4. 4Check that the wiring to the battery relay has no damage or short circuits
    5. 5If the fault remains, have a workshop with diagnostic equipment check the battery relay

    Symptome, die Sie bemerken können1

    • Automatic engine start and stop does not work, both while driving and at idle

    Was der Fehler beeinflussen kann1

    • The automatic engine start and stop function is switched off

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.