Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-8300
    VOLVO

    ECM-8300 - Alternator control module (ACM). Faulty

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    4 Modelle

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Modelle nach Baujahr und Motor anzeigen (9)
    • Volvo C30 (2007–2013)2007Nur Motor: B5254T3
    • Volvo C30 (2007–2013)2008–2013Nur Motor: B5254T7
    • Volvo C70 (2006–2013)2006–2007Nur Motor: B5254T3
    • Volvo C70 (2006–2013)2008–2013Nur Motor: B5254T7
    • Volvo S40 (2004–2013)2005–2007Nur Motor: B5254T3
    • Volvo S40 (2004–2013)2008Nur Motor: B5254T3, B5254T7
    • Volvo S40 (2004–2013)2009–2012Nur Motor: B5254T7
    • Volvo V50 (2004–2013)2005–2007Nur Motor: B5254T3
    • Volvo V50 (2004–2013)2008–2012Nur Motor: B5254T7

    Was bedeutet der Fehlercode?

    The engine control module communicates with the generator's control module (ACM). The fault code is set when the generator's control module reports that the generator is too hot, or that there is a mechanical fault, for example the generator standing still while the engine is revving. The fault applies to the C30, C70 (06-), S40 (04-) and V50.

    Mögliche Ursachen

    • Defective auxiliaries belt or belt tensioner
    • Damaged freewheel
    • Damaged generator
    • Air intake or air outlet to the generator is blocked

    Was Sie tun können

    1. 1Check that the drive belt and the belt tensioner are not damaged
    2. 2Check that the air intake and air outlet to the generator are not blocked
    3. 3Check the generator freewheel: the rotor shaft should turn freely in one direction only
    4. 4If you have a diagnostic tool: read the generator temperature in live data, if available, and see whether it rises unreasonably
    5. 5If the code is set again after driving, have a workshop replace the generator

    Symptome, die Sie bemerken können4

    • The "Generator not charging" warning lamp comes on while the engine runs
    • The battery discharges
    • Noise from the generator or the belt
    • The engine judders under acceleration

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.