Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-830C
    VOLVO

    ECM-830C - Alternator control module (ACM). Faulty signal

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    4 Modelle

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Modelle nach Baujahr und Motor anzeigen (9)
    • Volvo C30 (2007–2013)2007Nur Motor: B5254T3
    • Volvo C30 (2007–2013)2008–2013Nur Motor: B5254T7
    • Volvo C70 (2006–2013)2006–2007Nur Motor: B5254T3
    • Volvo C70 (2006–2013)2008–2013Nur Motor: B5254T7
    • Volvo S40 (2004–2013)2005–2007Nur Motor: B5254T3
    • Volvo S40 (2004–2013)2008Nur Motor: B5254T3, B5254T7
    • Volvo S40 (2004–2013)2009–2012Nur Motor: B5254T7
    • Volvo V50 (2004–2013)2005–2007Nur Motor: B5254T3
    • Volvo V50 (2004–2013)2008–2012Nur Motor: B5254T7

    Was bedeutet der Fehlercode?

    The engine control module has received word from the central electronic module (CEM) that the voltage in the power supply has been too high. The code is always stored together with another power supply fault code. The cause may be a battery charger with too high a charge voltage that was connected earlier, or a damaged generator control module. The fault applies to the C30, C70 (06-), S40 (04-) and V50.

    Mögliche Ursachen

    • A battery charger with too high a charge voltage was connected earlier
    • Damaged generator control module (charge regulator)

    Was Sie tun können

    1. 1Start the engine and read the battery voltage
    2. 2Load the battery with a few large consumers, such as the blower and high beam, and note whether the voltage becomes normal
    3. 3If you have a diagnostic tool: compare the battery voltage with the generator's target charge voltage
    4. 4Ask whether a battery charger with too high a charge voltage has been connected to the car in the past
    5. 5If the fault remains, have a workshop check the generator's carbon brushes and slip rings and, if needed, replace the control module or the generator

    Symptome, die Sie bemerken können2

    • The electrolyte in the battery boils when the engine runs
    • The headlamp bulb blows

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.