Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-843D
    VOLVO

    ECM-843D - Starter motor relay. Signal too low

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    4 Modelle

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Modelle nach Baujahr und Motor anzeigen (9)
    • Volvo C30 (2007–2013)2007Nur Motor: B5254T3
    • Volvo C30 (2007–2013)2008–2013Nur Motor: B5254T7
    • Volvo C70 (2006–2013)2006–2007Nur Motor: B5254T3
    • Volvo C70 (2006–2013)2008–2013Nur Motor: B5254T7
    • Volvo S40 (2004–2013)2006–2007Nur Motor: B5254T3
    • Volvo S40 (2004–2013)2008Nur Motor: B5254T3, B5254T7
    • Volvo S40 (2004–2013)2009–2012Nur Motor: B5254T7
    • Volvo V50 (2004–2013)2006–2007Nur Motor: B5254T3
    • Volvo V50 (2004–2013)2008–2012Nur Motor: B5254T7

    Was bedeutet der Fehlercode?

    The engine control module (ECM) compares the voltage on the starter motor relay signal wire with a limit value at start. If the voltage stays below the limit for a certain time, the control module registers a fault and sets the code. The cause may be a short to ground or an open circuit in the signal wire, a faulty relay, an open circuit in the supply to the starter motor or a damaged control module.

    Mögliche Ursachen

    • The signal wire is shorted to ground
    • Open circuit in the signal wire
    • Open circuit in the supply to the starter motor
    • Damaged starter motor relay
    • Damaged control module

    Was Sie tun können

    1. 1Read the code, clear it and check that it does not return at the next start
    2. 2With the ignition off, check the connectors to the starter motor relay for loose fit, oxidation and contact resistance
    3. 3Check the signal wire for breaks, and use a multimeter against ground (the body) to confirm it is not shorted
    4. 4Check that the starter motor relay is undamaged and seated properly
    5. 5If the fault remains after these checks, have a workshop check the supply to the starter motor and the control module

    Symptome, die Sie bemerken können1

    • The engine does not start

    Was der Fehler beeinflussen kann1

    • Only manual starting is possible

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.