VOLVO
ECM-852C - 5 volt power supply. Signal too high
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2007Nur Motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Nur Motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Nur Motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo S40 (2004–2013)2008Nur Motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Nur Motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Nur Motor: B5254T7
Was bedeutet der Fehlercode?
This code applies to the sensor supply in the engine when the voltage is too high. The engine control module (ECM) monitors the supply with the ignition on and stores the code if it is out of range. The sensors need the correct voltage to report accurate values, so the fault can affect how the car runs.
Mögliche Ursachen
- The supply wire to a sensor is in contact with voltage
- Damaged sensor
- Damaged engine control module (ECM)
Was Sie tun können
- 1Read the code, clear it and check whether it returns after a road test
- 2Check the sensor supply wire for chafing where it may have touched voltage; use a multimeter to confirm it is not connected to battery voltage
- 3Check the sensor connectors for loose fit and oxidation
- 4If the fault remains, have a workshop check each sensor separately before suspecting the control module
- 5Repair the fault and check that the code does not come back
Symptome, die Sie bemerken können3
- The engine misfires
- The engine is hard to start
- The starter motor does not turn
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.