VOLVO
ECM-8700 - Power supply. Internal fault
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (10)
- Volvo S60 (2001–2009)2001Nur Motor: D5244T
- Volvo S60 (2001–2009)2002–2003, 2006Nur Motor: D5244T, D5244T2
- Volvo S60 (2001–2009)2004–2005Nur Motor: D5244T, D5244T2, D5244T3
- Volvo S80 (1999–2006)2001Nur Motor: D5244T
- Volvo S80 (1999–2006)2002–2006Nur Motor: D5244T, D5244T2
- Volvo V70 (2000–2008)2001Nur Motor: D5244T
- Volvo V70 (2000–2008)2002–2003, 2006Nur Motor: D5244T, D5244T2
- Volvo V70 (2000–2008)2004–2005Nur Motor: D5244T, D5244T2, D5244T3
- Volvo V70 XC / XC70 (2001–2007)2003–2006Nur Motor: D5244T
- Volvo XC90 (2003–)2003–2006Nur Motor: D5244T
Was bedeutet der Fehlercode?
The engine control module (ECM) has found a fault in the voltage stabilizer that supplies the sensors. The code is set when the fault is detected. It is an internal fault in the control module, so the module needs replacing. A new control module is delivered without software and must be programmed after fitting.
Mögliche Ursachen
- Defective engine control module
Was Sie tun können
- 1Read the code, clear it and check whether it returns
- 2Check that the battery is in good condition and that the earth connections are tight and free from oxidation
- 3Have a workshop replace and program the control module; programming can only be done with workshop equipment
Symptome, die Sie bemerken können3
- The engine cuts out
- The engine does not start
- The engine runs unevenly
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.