VOLVO
ECM-900D - Brake pedal sensor. Signal too low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2007Nur Motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Nur Motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Nur Motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo S40 (2004–2013)2008Nur Motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Nur Motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Nur Motor: B5254T7
Was bedeutet der Fehlercode?
The engine control module (ECM) monitors the brake pedal sensor and stop lamp switch while the engine runs. The code is set as a consequence of a fault in the brake control module (BCM), so that fault must be fixed first. This code can be cleared only after the code in the brake control module has been fixed and erased.
Mögliche Ursachen
- A fault in the brake control module (BCM) or the central electronic module (CEM)
Was Sie tun können
- 1Read the codes stored in the BCM and the CEM first
- 2Fix the faults there and erase them; only then can this code be cleared
- 3Do not work on the brake system yourself; if the fault does not go away, have a workshop carry out the brake-related checks
Symptome, die Sie bemerken können1
- Cruise control does not work at all
Was der Fehler beeinflussen kann1
- Cruise control is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.