Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-900E
    VOLVO

    ECM-900E - Engine control module (ECM), internal fault. Faulty signal 10

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.

    Gilt für folgende Modelle:

    5 Modelle

    C70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S70 (1997–2000), S80 (1999–2006), V70 (1997–2000)

    Modelle nach Baujahr und Motor anzeigen (5)
    • Volvo C70 Cabriolet (1998–2005)2000Nur Motor: B5244S
    • Volvo C70 Coupé (1998–2002)2000Nur Motor: B5244S
    • Volvo S70 (1997–2000)2000Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
    • Volvo S80 (1999–2006)2000Nur Motor: B5244S, B5244S2
    • Volvo V70 (1997–2000)2000Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2

    Was bedeutet der Fehlercode?

    The engine control module (ECM) runs internal tests on its processor, software and memory. The code is set if one of these tests finds a fault in the group called signal 10. While the fault is active the throttle follows the accelerator pedal directly, and the cruise control cannot be used during that driving cycle. The fault may lie in the control module itself.

    Mögliche Ursachen

    • Defective engine control module (ECM)

    Was Sie tun können

    1. 1Read the code status and see whether other codes are stored in the same readout
    2. 2If the fault is no longer present when the code is read again, the fault has been intermittent
    3. 3If the fault remains, have a workshop replace the control module and program it, since a new control module is supplied without software

    Symptome, die Sie bemerken können4

    • The malfunction indicator light is on
    • The engine misfires
    • Cruise control does not work
    • Poor response from the accelerator pedal

    Was der Fehler beeinflussen kann3

    • Idle may feel very uneven, because engine speed is controlled by cutting fuel to the cylinders one at a time
    • The throttle follows the accelerator pedal position directly
    • Cruise control is switched off during the driving cycle in which the fault was detected

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.