VOLVO
ECM-9011 - Brake pedal sensor, signal via CAN. Faulty signal
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2007Nur Motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Nur Motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Nur Motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo S40 (2004–2013)2008Nur Motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Nur Motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Nur Motor: B5254T7
Was bedeutet der Fehlercode?
The engine control module (ECM) receives the brake pedal sensor signal over the CAN network from the brake control module (BCM). The code is set if that signal is faulty or if the CAN communication has a fault. It is a consequence of a fault in the brake control module, so that fault should be fixed first and the code cleared afterwards.
Mögliche Ursachen
- Fault in the brake control module (BCM)
Was Sie tun können
- 1Read the codes in the BCM first and remedy them
- 2Clear this code only after the code in the brake control module has been remedied and erased
- 3The brake system is safety-critical; if the fault remains after checking the brake control module, have a workshop take over the fault finding on the brake circuit
Symptome, die Sie bemerken können1
- Cruise control does not work at all
Was der Fehler beeinflussen kann1
- Cruise control is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.