VOLVO
ECM-901B - Brake pedal sensor, signal via CAN. Signal missing
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2007Nur Motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Nur Motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Nur Motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo S40 (2004–2013)2008Nur Motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Nur Motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Nur Motor: B5254T7
Was bedeutet der Fehlercode?
The engine control module (ECM) receives no valid brake pedal signal over the CAN network from the brake control module (BCM), and the code is set. The cause lies in the brake control module, so this code is a consequence of that fault. Fix the BCM fault first; this code can be cleared only once the fault in the brake control module has been fixed and erased.
Mögliche Ursachen
- The cause lies in the brake control module (BCM)
Was Sie tun können
- 1Read the codes in the BCM and trace those first
- 2Clear this code only after the code in the brake control module has been fixed and erased
- 3Because the fault concerns the brake system, have a workshop take over if the brake control module check finds nothing
Symptome, die Sie bemerken können1
- Cruise control does not work at all
Was der Fehler beeinflussen kann1
- Cruise control is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.