VOLVO
ECM-901D - Brake pedal sensor, signal via CAN. Signal too low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2007Nur Motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Nur Motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Nur Motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo S40 (2004–2013)2008Nur Motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Nur Motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Nur Motor: B5254T7
Was bedeutet der Fehlercode?
The ECM has registered that the brake pedal sensor signal, sent over the CAN network from the brake control module (BCM), is too low, or that the CAN communication has a fault. The code is a follow-on fault that is first set in the brake control module. Fault finding should therefore be done there, and this code can be cleared once the fault in the brake control module has been fixed.
Mögliche Ursachen
- The cause lies in the brake control module (BCM)
Was Sie tun können
- 1Read the codes in the BCM first, and trace and fix them
- 2Clear this code only after the code in the brake control module has been fixed and erased
- 3If the fault cannot be found in the brake control module, have a workshop continue the fault finding; the brake system is safety-critical
Symptome, die Sie bemerken können1
- Cruise control does not work at all
Was der Fehler beeinflussen kann1
- Cruise control is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.