VOLVO
ECM-9100 - Clutch pedal position sensor. Faulty signal
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
8 ModelleC70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (17)
- Volvo C70 (2006–2013)2006Nur Motor: B5254T3
- Volvo S40 (2004–2013)2005–2006Nur Motor: B5254T3
- Volvo S60 (2001–2009)2005–2006Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Nur Motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Nur Motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V50 (2004–2013)2005–2006Nur Motor: B5254T3
- Volvo V70 (2000–2008)2005Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Nur Motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle Motoren außer: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Nur Motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Nur Motor: B5254T2
- Volvo XC90 (2003–)2005–2006Nur Motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Nur Motor: B5254T2
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
- Volvo XC90 (2003–)2015
Was bedeutet der Fehlercode?
The ECM finds a bad reading from the clutch pedal sensor, or receives an error message over CAN from the central electronic module (CEM) pointing to it. The code cannot be cleared until the fault in the CEM has been fixed and erased, so the codes in the CEM are dealt with first.
Mögliche Ursachen
- Open circuit in the signal wire to the clutch pedal sensor
- Incorrectly fitted clutch pedal sensor
- Damaged clutch pedal sensor
- The fault lies in the central electronic module (CEM)
Was Sie tun können
- 1Read the codes in the central electronic module (CEM) first and remedy them; this code can be cleared only after that
- 2If you have diagnostic equipment, read the clutch pedal value in live data while pressing and releasing the clutch pedal slowly; the value should change smoothly with the pedal movement
- 3Check that the clutch pedal sensor is fitted correctly and look for damage; check that its connections to the control module are tight and free from oxidation
- 4If the fault remains after these checks, have a workshop check the clutch pedal sensor and the wiring
Symptome, die Sie bemerken können1
- Cruise control does not work at all
Was der Fehler beeinflussen kann1
- Cruise control is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.