VOLVO
ECM-910D - Clutch pedal sensor. Signal too low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
8 ModelleC70 (2006–2013), S40 (2004–2013), S60 (2001–2009), S80 (1999–2006), V50 (2004–2013), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (17)
- Volvo C70 (2006–2013)2006Nur Motor: B5254T3
- Volvo S40 (2004–2013)2005–2006Nur Motor: B5254T3
- Volvo S60 (2001–2009)2005–2006Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Nur Motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Nur Motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V50 (2004–2013)2005–2006Nur Motor: B5254T3
- Volvo V70 (2000–2008)2005Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Nur Motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle Motoren außer: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Nur Motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Nur Motor: B5254T2
- Volvo XC90 (2003–)2005–2006Nur Motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Nur Motor: B5254T2
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
- Volvo XC90 (2003–)2015
Was bedeutet der Fehlercode?
The ECM finds a signal from the clutch pedal sensor that is too low, or receives an error message over CAN from the central electronic module (CEM) that points to it. Fault finding is done in the CEM first, since this code cannot be cleared until the fault there has been fixed and erased.
Mögliche Ursachen
- The signal wire is shorted to ground
- A damaged clutch pedal sensor
- The fault lies in the central electronic module (CEM)
Was Sie tun können
- 1Read the codes in the central electronic module (CEM) first, and trace and fix them
- 2Clear this code only after the code in the CEM has been fixed and erased
- 3If you have diagnostic equipment, read the clutch pedal movement in live data while slowly pressing and releasing the pedal; the value should change with the pedal movement
- 4Use a multimeter to check that the clutch pedal sensor signal wire is not shorted to ground (the body), and check the connectors for oxidation
- 5If the fault remains, have a workshop check the clutch pedal sensor
Symptome, die Sie bemerken können1
- Cruise control does not work at all
Was der Fehler beeinflussen kann1
- Cruise control is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.