VOLVO
ECM-930A - Clutch pedal sensor. Faulty signal
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008)
Modelle nach Baujahr und Motor anzeigen (16)
- Volvo S60 (2001–2009)2001Nur Motor: B5244S, B5244S2
- Volvo S60 (2001–2009)2002Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo S60 (2001–2009)2003–2005Nur Motor: B5244SG, B5244SG2
- Volvo S60 (2001–2009)2006–2008Nur Motor: B5244SG
- Volvo S70 (1997–2000)1999Nur Motor: B5254S DENSO
- Volvo S70 (1997–2000)2000Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo S80 (1999–2006)1999–2000Nur Motor: B5244S, B5244S2
- Volvo S80 (1999–2006)2001Nur Motor: B5244S, B5244S2, B5244SG
- Volvo S80 (1999–2006)2002Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo S80 (1999–2006)2003–2005Nur Motor: B5244SG, B5244SG2
- Volvo S80 (1999–2006)2006Nur Motor: B5244SG
- Volvo V70 (1997–2000)2000Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2001Nur Motor: B5244S, B5244S2, B5244SG
- Volvo V70 (2000–2008)2002Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
- Volvo V70 (2000–2008)2003–2005Nur Motor: B5244SG, B5244SG2
- Volvo V70 (2000–2008)2006–2008Nur Motor: B5244SG
Was bedeutet der Fehlercode?
The ECM works out which gear is in use from engine speed and vehicle speed. The code concerns the clutch pedal sensor signal, and it can be set together with other fault codes.
Mögliche Ursachen
- Damaged clutch pedal sensor
- Clutch pedal position sensor incorrectly fitted
Was Sie tun können
- 1Read the fault status with a diagnostic tool, and check whether the ECM has stored other codes for the clutch pedal sensor. If ECM-9300 is stored, deal with that code first
- 2Frozen values and the counter show whether the faults were stored together, and how intermittent the fault is
- 3If you have a diagnostic tool: compare the clutch pedal sensor value in live data with the pedal released and with the pedal pressed down. The difference should be clear
- 4Check how the clutch pedal sensor is fitted and that it works
- 5After remedying: switch the ignition off for three minutes, switch it on and off again, and wait a further three minutes. If the electric cooling fan runs, wait two minutes more
Symptome, die Sie bemerken können2
- Malfunction indicator lamp (MIL) lights
- Switch to gas drive is not possible
Was der Fehler beeinflussen kann2
- Cruise control is off for the driving cycle in which the fault was detected
- It works again at the next start if the fault is no longer present
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.