VOLVO
ECM-9320 - Clutch pedal sensor. Signal outside its permitted range
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (4)
Was bedeutet der Fehlercode?
Clutch pedal position reaches the ECM through a sensor and a separate switch. The code is set when the ECM detects that the position sensor signal is faulty. The fault may lie in the sensor, the switch, the connectors or the wiring.
Mögliche Ursachen
- Contact resistance or oxidation in the connectors
- Open circuit in the signal cable from the position sensor
- Clutch pedal switch incorrectly fitted
- Clutch pedal position sensor incorrectly fitted
- Damaged clutch pedal switch
- Damaged clutch pedal position sensor
Was Sie tun können
- 1Check that the fuses are intact. Their locations are in the handbook or on the fuse box cover
- 2Check the clutch pedal switch and position sensor: are they correctly fitted, and are the connectors secure without oxidation or contact resistance
- 3Use a multimeter to check that the signal cable from the position sensor has no open circuit
- 4If you have a diagnostic tool: read the clutch pedal position in live data while the clutch is pressed and released. The value should follow the pedal
- 5If the sensor or connector is damaged, have a workshop replace it. The new part must also be fitted and adjusted correctly
Symptome, die Sie bemerken können1
- Starting with autostart does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.