Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-9400
    VOLVO

    ECM-9400 - Brake pedal sensor. Signal too low

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.

    Gilt für folgende Modelle:

    7 Modelle

    C70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V70 (1997–2000), V70 (2000–2008)

    Modelle nach Baujahr und Motor anzeigen (11)
    • Volvo C70 Cabriolet (1998–2005)2000Nur Motor: B5244S
    • Volvo C70 Coupé (1998–2002)1999Nur Motor: B5254S DENSO
    • Volvo C70 Coupé (1998–2002)2000Nur Motor: B5244S
    • Volvo S60 (2001–2009)2001Nur Motor: B5244S, B5244S2
    • Volvo S70 (1997–2000)1999Nur Motor: B5254S DENSO
    • Volvo S70 (1997–2000)2000Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
    • Volvo S80 (1999–2006)1999–2000Nur Motor: B5244S, B5244S2
    • Volvo S80 (1999–2006)2001Nur Motor: B5244S, B5244S2, B5244SG
    • Volvo V70 (1997–2000)1999Nur Motor: B5254S DENSO
    • Volvo V70 (1997–2000)2000Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
    • Volvo V70 (2000–2008)2001Nur Motor: B5244S, B5244S2, B5244SG

    Was bedeutet der Fehlercode?

    The code means the brake pedal position sensor signal is too low. On cars of model year 1999 to 2001 the signal is measured directly at the sensor. On model year 2002 the ECM instead takes the brake pedal position from the brake control module (BCM) over the CAN network. The brake pedal sensor belongs to the brake system, so the fault should be dealt with.

    Mögliche Ursachen

    • Signal cable short-circuited to ground
    • On model year 2002: a fault in the CAN communication between the BCM and the ECM

    Was Sie tun können

    1. 1Read the fault codes in the brake control module (BCM) and in the ECM. If the BCM has codes that point to the brake pedal sensor, deal with those first
    2. 2If you have a diagnostic tool: read the fault status. It shows whether the fault is permanent or intermittent, and whether other codes are stored
    3. 3Use a multimeter to check that the signal cable from the sensor is not shorted to ground (body). Check the wiring and connectors: are they secure, and is there oxidation
    4. 4The brake system is safety-critical. If the fault remains, have a workshop check it, and do not drive with a safety fault in the brakes

    Symptome, die Sie bemerken können2

    • Electronic throttle system (ETS) warning lamp lights
    • Cruise control does not function at all

    Was der Fehler beeinflussen kann2

    • Cruise control is off for the driving cycle in which the fault was detected
    • At the next start the function is available, if the fault is no longer present

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.