VOLVO
ECM-940C - Accelerator pedal (AP) position sensor, analog signal. Signal too high
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
5 ModelleS60 (2001–2009), S80 (1999–2006), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (14)
- Volvo S60 (2001–2009)2005–2006Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo S60 (2001–2009)2008–2009Nur Motor: B5204T5, B5244T5, B5254T2
- Volvo S80 (1999–2006)2005–2006Nur Motor: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
- Volvo V70 (2000–2008)2005Nur Motor: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2006–2007Nur Motor: B5204T5, B5244T5, B5254T2, B5254T4
- Volvo V70 (2000–2008)2008Nur Motor: B5254T2
- Volvo V70 XC / XC70 (2001–2007)2005Alle Motoren außer: D5244T
- Volvo V70 XC / XC70 (2001–2007)2006Nur Motor: B5244T4, B5254T2
- Volvo V70 XC / XC70 (2001–2007)2007Nur Motor: B5254T2
- Volvo XC90 (2003–)2005–2006Nur Motor: B5254T2, B6294T
- Volvo XC90 (2003–)2007–2012Nur Motor: B5254T2
- Volvo XC90 (2003–)2013–2014Nur Motor: B5254T9
- Volvo XC90 (2003–)2015
Was bedeutet der Fehlercode?
The ECM detects a problem in the analog accelerator pedal sensor signal, with the signal too high. The fault may be a signal cable shorted to supply voltage or a damaged sensor. The accelerator pedal can then be disabled when the brake is pressed.
Mögliche Ursachen
- Signal cable shorted to supply voltage
- Damaged accelerator pedal sensor
Was Sie tun können
- 1Check the accelerator pedal sensor connector for contact resistance and oxidation, and that it is secure
- 2With the ignition off, use a multimeter to check that the signal cable from the accelerator pedal sensor is not shorted to supply voltage
- 3If you have a diagnostic tool: read the accelerator pedal movement in live data while the pedal is pressed slowly and released. The value should follow the pedal
- 4Check that the fuses are intact. Their locations are in the handbook or on the fuse box cover
- 5If the fault remains, have a workshop replace the accelerator pedal sensor. The accelerator can be disabled when the brake is pressed, so do not keep driving with the fault
Symptome, die Sie bemerken können1
- Poor accelerator pedal response
Was der Fehler beeinflussen kann1
- The accelerator pedal is disabled when the brake is pressed
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.