VOLVO
ECM-9430 - Accelerator pedal (AP) position sensor, analog signal. Faulty signal
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
4 ModelleC30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo C30 (2007–2013)2007Nur Motor: B5254T3
- Volvo C30 (2007–2013)2008–2013Nur Motor: B5254T7
- Volvo C70 (2006–2013)2006–2007Nur Motor: B5254T3
- Volvo C70 (2006–2013)2008–2013Nur Motor: B5254T7
- Volvo S40 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo S40 (2004–2013)2008Nur Motor: B5254T3, B5254T7
- Volvo S40 (2004–2013)2009–2012Nur Motor: B5254T7
- Volvo V50 (2004–2013)2005–2007Nur Motor: B5254T3
- Volvo V50 (2004–2013)2008–2012Nur Motor: B5254T7
Was bedeutet der Fehlercode?
The ECM receives a fault message over CAN from the central electronic module (CEM). The message concerns either the analog accelerator pedal sensor signal or the CAN communication. The code is stored in the ECM, and fault tracing starts in the CEM.
Mögliche Ursachen
- Fault in the central electronic module (CEM), where fault tracing starts
Was Sie tun können
- 1Read the fault codes in the CEM first and deal with them. This code cannot be cleared until the CEM code has gone
- 2If you have a diagnostic tool: read the accelerator pedal value in live data with the engine running, while the pedal is pressed slowly and released
- 3If the code comes back once the CEM fault is remedied, have a workshop with diagnostic equipment fault-trace further
- 4The accelerator pedal can stop working when the brake is pressed. Do not drive with a fault in throttle response, and have a workshop check it at once
Symptome, die Sie bemerken können2
- Poor accelerator pedal response
- Cruise control does not function at all
Was der Fehler beeinflussen kann1
- The accelerator pedal does not work when the brake pedal is pressed
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.