Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-A10B
    VOLVO

    ECM-A10B - LIN communication. Alternator control module (ACM), faulty communication

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    4 Modelle

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Modelle nach Baujahr und Motor anzeigen (6)
    • Volvo C30 (2007–2013)2007–2011Nur Motor: B5244S4
    • Volvo C70 (2006–2013)2006Alle Motoren außer: B5254T3
    • Volvo C70 (2006–2013)2007–2010Nur Motor: B5244S4, B5244S5
    • Volvo C70 (2006–2013)2011Nur Motor: B5244S4
    • Volvo S40 (2004–2013)2005–2010Nur Motor: B5244S4, B5244S5, B5244S7
    • Volvo V50 (2004–2013)2005–2010Nur Motor: B5244S4, B5244S5, B5244S7

    Was bedeutet der Fehlercode?

    The engine control module communicates with the alternator control module (ACM) over the LIN network, a simple serial communication link. The code is set when the engine control module detects interference in its communication with the alternator control module. The fault may therefore lie in the wiring between the modules or in either of them.

    Mögliche Ursachen

    • Contact resistance and oxidation in the terminals
    • Short circuit between the LIN wires
    • Open circuit in one of the LIN wires
    • Damaged alternator control module (ACM), which is also the charge regulator
    • An alternator not designed for LIN communication is fitted
    • Internal fault in another module on the same part of the LIN network

    Was Sie tun können

    1. 1Check that the connector on the alternator control module is fully seated and free from oxidation
    2. 2With a multimeter, check that the signal wire between the engine control module and the alternator control module has no open circuit and no contact with ground or supply voltage
    3. 3Has the alternator been replaced recently? Check that it is intended for LIN communication, since a different alternator can cause this code
    4. 4If the wiring is intact, the alternator control module may be damaged; have a workshop replace it and then check that the fault is gone

    Symptome, die Sie bemerken können1

    • The generator not charging warning lamp lights while the engine is running

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.