Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-A20B
    VOLVO

    ECM-A20B - Engine control module (ECM). Signal missing

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    4 Modelle

    C30 (2007–2013), C70 (2006–2013), S40 (2004–2013), V50 (2004–2013)

    Modelle nach Baujahr und Motor anzeigen (9)
    • Volvo C30 (2007–2013)2007Nur Motor: B5254T3
    • Volvo C30 (2007–2013)2008–2013Nur Motor: B5254T7
    • Volvo C70 (2006–2013)2006–2007Nur Motor: B5254T3
    • Volvo C70 (2006–2013)2008–2013Nur Motor: B5254T7
    • Volvo S40 (2004–2013)2005–2007Nur Motor: B5254T3
    • Volvo S40 (2004–2013)2008Nur Motor: B5254T3, B5254T7
    • Volvo S40 (2004–2013)2009–2012Nur Motor: B5254T7
    • Volvo V50 (2004–2013)2005–2007Nur Motor: B5254T3
    • Volvo V50 (2004–2013)2008–2012Nur Motor: B5254T7

    Was bedeutet der Fehlercode?

    The central electronic module (CEM) sends a timer value over the CAN network that tells the modules how long the engine has been off since its last shutdown. The engine control module uses it, for example, when restarting a warm engine. The code is set when the engine control module finds the timer value wrong or missing, and the malfunction indicator lamp comes on.

    Mögliche Ursachen

    • Fault in the central electronic module (CEM), which should be checked first
    • Open or short circuit in the CAN wiring between the engine control module and the CEM
    • Damaged central electronic module (CEM)

    Was Sie tun können

    1. 1Read the fault codes in the CEM and in any other modules that may be involved, and note which are stored
    2. 2Remedy the faults in the CEM and the CAN network first; this code must not be cleared until the codes in the CEM and other affected modules are remedied and cleared
    3. 3Check the CAN wiring and connectors between the engine control module and the CEM for open circuits, short circuits and chafing
    4. 4After the repair, clear the code and start the car to see whether it returns

    Symptome, die Sie bemerken können1

    • Malfunction indicator lamp (MIL) on

    Was der Fehler beeinflussen kann1

    • The engine control module calculates a timer value instead

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.