Was bedeutet der Fehlercode ECM-B10A200?

Diagnose und Fehlercodedefinition für ECM-B10A200 (Volvo S60 (2011–), Volvo S60 (2011–), Volvo S60 (2011–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-B10A200 - Crash Input. General Failure Information. No sub type information

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

7 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–)

Modelle nach Baujahr und Motor anzeigen (22)

Was bedeutet der Fehlercode?

The engine control module records internally whether the car has been in a crash. The code is set when the CEM reports internally that a collision has taken place, and when the engine control module detects a fault in the airbag signal. Engine start is then not permitted, and the code must be cleared like a normal fault code.

Mögliche Ursachen

The airbag has deployed
A fault in the central electronic module (CEM)
A fault in the supplemental restraint system (SRS)

Was Sie tun können

1Read the fault codes in the central electronic module (CEM) first and then in the supplemental restraint system (SRS)
2The code can be cleared only once the root fault has been remedied and its code erased
3The airbag and the restraint system are safety-critical; do not work on them yourself and have a workshop check them

Symptome, die Sie bemerken können5

The starter motor turns but the engine does not start
General warning lamp on
Message in the display
The check engine lamp lights or behaves abnormally
Text window with a warning symbol and text message

Was der Fehler beeinflussen kann1

Engine start is not permitted

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.