Was bedeutet der Fehlercode ECM-B10A248?

Diagnose und Fehlercodedefinition für ECM-B10A248 (Volvo S60 (2011–), Volvo S80 (2007–), Volvo V40 (2013–)). Steuergerätereparatur bei OBD Tuning.

VOLVO

ECM-B10A248 - Crash Input. System Internal Failures. Supervision software failure

System

Motorsteuergerät (ECM)

Volvo-Modelle, für die dieser Fehlercode gilt

Gilt für folgende Modelle:

8 Modelle

S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

Modelle nach Baujahr und Motor anzeigen (8)

Was bedeutet der Fehlercode?

Although the code is named a fault in the supervision software, it is an event-controlled information code that records a collision. The engine control module registers internally whether the car has been in a crash, and the code is set when the central electronic module (CEM) reports that a collision has taken place. The code therefore does not indicate a fault in the engine control module.

Mögliche Ursachen

The code comes from information about a crash, not from a fault that must be repaired

Was Sie tun können

1Clear the fault code as a normal code once you have read it; it needs no fault-tracing
2If airbags have deployed or the car has been in a collision, have a workshop check the supplemental restraint system
3The restraint system is safety-critical; do not work on it yourself

Symptome, die Sie bemerken können1

Engine is hard to start and cranks slowly

Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.