VOLVO
ECM-B139F13 - Main Battery Relay. General Electrical Failures. Circuit open
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
12 ModelleC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (24)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3, D4162T
- Volvo S60 (2011–)2012Alle Motoren außer: B4204T7, B5254T5, B6304T4
- Volvo S60 (2011–)2013–2014Alle Motoren außer: B4204T7, B6304T4
- Volvo S60 (2011–)2015Alle Motoren außer: B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2011Nur Motor: B4164T
- Volvo S80 (2007–)2012Nur Motor: B4164T, B4164T2, D4162T, D5204T3, D5244T11, D5244T15
- Volvo S80 (2007–)2013–2014Alle Motoren außer: B4204T6, B4204T7, B6304T4, B6324S4, B6324S5
- Volvo S80 (2007–)2015Alle Motoren außer: B6304T4, B6324S4, B6324S5
- Volvo V40 (2013–)2013–2015
- Volvo V40 Cross Country (2013–)2013–2015
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3, D4162T
- Volvo V60 (2011–)2012–2014Alle Motoren außer: B4204T7, B6304T4
- Volvo V60 (2011–)2015Alle Motoren außer: B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2011Nur Motor: B4164T
- Volvo V70 (2008–)2012Alle Motoren außer: B4204T7, B5254T10, B6304T4, B6324S5
- Volvo V70 (2008–)2013–2014Alle Motoren außer: B4204T7, B6304T4, B6324S5
- Volvo V70 (2008–)2015Alle Motoren außer: B6304T4
- Volvo XC60 (2009–)2012Nur Motor: D5204T3, D5244T11, D5244T15, D5244T17
- Volvo XC60 (2009–)2013–2015Alle Motoren außer: B4204T7, B6304T4, B6324S4, B6324S5
- Volvo XC70 (2008–)2012–2015Alle Motoren außer: B6304T4, B6324S4, B6324S5
Was bedeutet der Fehlercode?
The engine control module sees that the signal cable between itself and the main battery relay is open, so it cannot control the relay. Automatic start/stop is switched off, and the engine may have difficulty starting because the battery circuit is not connected correctly.
Mögliche Ursachen
- Loose connector or oxidation in the connector
- Open circuit on the control signal lead
- Damaged battery relay
- Mechanical or electrical fault on the relay
- Wiring to the relay is shorted or broken
Was Sie tun können
- 1Check that the fuses are intact
- 2Check that the battery is charged and that the battery terminals are tight
- 3Follow the wiring from the relay to the engine control module and look for breaks, chafing and connectors that are loose
- 4Use a multimeter to check that the wire between the relay and the engine control module is continuous with the connectors disconnected
- 5Erase the fault code and road test the car to see whether the fault returns
- 6If the fault remains after these checks, have a workshop replace the battery relay
Symptome, die Sie bemerken können2
- Automatic engine start/stop does not work, both while driving and at idle
- The engine does not start, the starter motor does not turn and there is no clicking sound at start attempts
Was der Fehler beeinflussen kann2
- The automatic engine start/stop function is switched off
- Starting can be prevented when the relay does not work
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.