VOLVO
ECM-B1A980 - LIN Bus circuit #1. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
2 ModelleS80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (2)
Was bedeutet der Fehlercode?
The engine control module communicates with the alternator control module (ACM) over the LIN bus, but its messages never reach the bus. The fault means the engine control module cannot communicate with the alternator control module, which can make the engine start poorly.
Mögliche Ursachen
- Damaged connector
- Open circuit on the LIN bus between the engine control module and the alternator control module
Was Sie tun können
- 1Check that the fuses are intact
- 2Check the connectors at the engine control module and the alternator control module for damage, loose contacts and corrosion
- 3Use a multimeter to check that the LIN wire is continuous between the engine control module and the alternator control module with the connectors disconnected
- 4Erase the fault code and start the engine to see whether the fault returns
- 5If the fault remains, have a workshop check communication on the bus with diagnostic equipment
Symptome, die Sie bemerken können1
- The engine does not start, either all the time or at some times
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.