VOLVO
ECM-C400 - Configuration fault. Faulty configuration
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
3 ModelleC30 (2007–2013), S40 (2004–2013), V50 (2004–2013)
Modelle nach Baujahr und Motor anzeigen (13)
- Volvo C30 (2007–2013)2007–2009Nur Motor: B4184S11, B4184S8, B4204S3
- Volvo C30 (2007–2013)2010Nur Motor: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo C30 (2007–2013)2011–2013Nur Motor: B4204S3, B4204S4
- Volvo S40 (2004–2013)2005Nur Motor: B4184S11
- Volvo S40 (2004–2013)2006Nur Motor: B4184S11, B4184S8
- Volvo S40 (2004–2013)2007–2009Nur Motor: B4184S11, B4184S8, B4204S3
- Volvo S40 (2004–2013)2010Nur Motor: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo S40 (2004–2013)2011–2012Nur Motor: B4204S3, B4204S4
- Volvo V50 (2004–2013)2005Nur Motor: B4184S11
- Volvo V50 (2004–2013)2006Nur Motor: B4184S11, B4184S8
- Volvo V50 (2004–2013)2007–2009Nur Motor: B4184S11, B4184S8, B4204S3
- Volvo V50 (2004–2013)2010Nur Motor: B4184S11, B4184S8, B4204S3, B4204S4
- Volvo V50 (2004–2013)2011–2012Nur Motor: B4204S3, B4204S4
Was bedeutet der Fehlercode?
The engine control module holds a unique configuration ID that must agree with the other modules on the car's CAN network. If no acceptable ID arrives in time, the fault code is set. The driver normally notices no symptoms.
Mögliche Ursachen
- Wrong CAN configuration ID, for example when the module is not made for this exact car, such as a used unit with other software or hardware
- Open circuit in the CAN wiring between the engine control module and the CEM
Was Sie tun können
- 1If the module has been replaced, for example with a used one, ask a workshop to check the configuration, since it may carry the wrong ID for this car
- 2Read out the fault codes in the CEM and the engine control module, and fix the CAN codes first
- 3Check that the fuses are intact and that the battery has a good charge
- 4Look for breaks and chafing on the CAN wiring between the engine control module and the CEM
- 5Erase the fault code once the faults are fixed, then road test the car to see whether it comes back
- 6If the fault remains, have a workshop check the configuration and software with diagnostic equipment
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.