Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-E000
    VOLVO

    ECM-E000 - Control module communication. Faulty communication

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.

    Gilt für folgende Modelle:

    13 Modelle

    C30 (2007–2013), C70 (2006–2013), C70 Cabriolet (1998–2005), C70 Coupé (1998–2002), S40 (2004–2013), S60 (2001–2009), S70 (1997–2000), S80 (1999–2006), V50 (2004–2013), V70 (1997–2000), V70 (2000–2008), V70 XC / XC70 (2001–2007), XC90 (2003–)

    Modelle nach Baujahr und Motor anzeigen (31)
    • Volvo C30 (2007–2013)2007–2011Nur Motor: B5244S4
    • Volvo C70 (2006–2013)2006Alle Motoren außer: B5254T3
    • Volvo C70 (2006–2013)2007–2010Nur Motor: B5244S4, B5244S5
    • Volvo C70 (2006–2013)2011Nur Motor: B5244S4
    • Volvo C70 Cabriolet (1998–2005)2000Nur Motor: B5244S
    • Volvo C70 Coupé (1998–2002)1999Nur Motor: B5254S DENSO
    • Volvo C70 Coupé (1998–2002)2000Nur Motor: B5244S
    • Volvo S40 (2004–2013)2004Nur Motor: B5244S4, B5244S5
    • Volvo S40 (2004–2013)2005–2010Nur Motor: B5244S4, B5244S5, B5244S7
    • Volvo S60 (2001–2009)2001–2004
    • Volvo S60 (2001–2009)2005Alle Motoren außer: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
    • Volvo S60 (2001–2009)2006Nur Motor: B5244S, B5244S2, B5244S6, B5244SG, D5244T, D5244T2
    • Volvo S60 (2001–2009)2007–2008Nur Motor: B5244S, B5244S2, B5244SG
    • Volvo S60 (2001–2009)2009Nur Motor: B5244S, B5244S2
    • Volvo S70 (1997–2000)1999Nur Motor: B5254S DENSO
    • Volvo S70 (1997–2000)2000Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
    • Volvo S80 (1999–2006)1999–2004
    • Volvo S80 (1999–2006)2005Alle Motoren außer: B5204T5, B5244T4, B5254T2, B6294S2, B6294T
    • Volvo S80 (1999–2006)2006Nur Motor: B5244S, B5244S2, B5244SG, D5244T, D5244T2
    • Volvo V50 (2004–2013)2004Nur Motor: B5244S4, B5244S5
    • Volvo V50 (2004–2013)2005–2010Nur Motor: B5244S4, B5244S5, B5244S7
    • Volvo V70 (1997–2000)1999Nur Motor: B5254S DENSO
    • Volvo V70 (1997–2000)2000Nur Motor: B5244S, B5244S2, B5244SG, B5244SG2
    • Volvo V70 (2000–2008)2000–2004
    • Volvo V70 (2000–2008)2005Alle Motoren außer: B5204T5, B5244T4, B5244T5, B5254T2, B5254T4
    • Volvo V70 (2000–2008)2006Nur Motor: B5244S, B5244S2, B5244S6, B5244SG, D5244T, D5244T2
    • Volvo V70 (2000–2008)2007–2008Nur Motor: B5244S, B5244S2, B5244SG
    • Volvo V70 XC / XC70 (2001–2007)2001–2004
    • Volvo V70 XC / XC70 (2001–2007)2005–2006Nur Motor: D5244T
    • Volvo XC90 (2003–)2003–2004
    • Volvo XC90 (2003–)2005–2006Nur Motor: D5244T

    Was bedeutet der Fehlercode?

    The engine control module has detected a fault in CAN communication, so the control modules that should talk to each other are out of step. The fault can lie in connectors, wiring, or in a control module.

    Mögliche Ursachen

    • Contact resistance in the connections
    • Short circuit between the CAN wires
    • Open circuit in one of the CAN wires
    • Internal fault in the control module
    • Internal fault in another control module on the same network section

    Was Sie tun können

    1. 1Read out the fault codes in the CEM and in the other control modules, and fix the CAN codes first
    2. 2Check the battery charge and that the fuses are intact
    3. 3Check the connectors at the engine control module and the CEM for play and corrosion
    4. 4Look for chafing and pinched sections along the wiring harness
    5. 5If a control module stays in limp-home mode, lift the battery negative terminal, wait a moment and reconnect it
    6. 6If the fault remains, have a workshop check the CAN network with diagnostic equipment

    Symptome, die Sie bemerken können5

    • General warning lamp lit
    • ETS warning lamp lit
    • The cruise control does not work
    • The engine jerks under acceleration
    • It is not possible to switch over to gas operation

    Was der Fehler beeinflussen kann3

    • The cruise control is switched off
    • The throttle closes when the brakes are applied
    • The control module switches itself off (bus-off)

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.