VOLVO
ECM-P001600 - Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
12 ModelleC30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (32)
- Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
- Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo S60 (2011–)2011–2013Nur Motor: B6304T4, D4162T
- Volvo S60 (2011–)2014Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, D4162T, D4204T5
- Volvo S60 (2011–)2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T3, B6304T4, B6304T5, D4162T, D4204T5
- Volvo S80 (2007–)2007Nur Motor: B6324S, B8444S
- Volvo S80 (2007–)2008–2009Nur Motor: B6304T2, B6324S, B8444S, D4204T
- Volvo S80 (2007–)2010Nur Motor: D4204T
- Volvo S80 (2007–)2012–2013Nur Motor: D4162T
- Volvo S80 (2007–)2014–2015Nur Motor: B4204T11, B4204T12, B4204T15, D4162T, D4204T5
- Volvo V40 (2013–)2013–2014Nur Motor: D4162T
- Volvo V40 (2013–)2015Nur Motor: B4204T11, D4162T, D4204T14
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: D4162T
- Volvo V40 Cross Country (2013–)2015Nur Motor: B4204T11, D4162T, D4204T14
- Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
- Volvo V60 (2011–)2011–2013Nur Motor: B6304T4, D4162T
- Volvo V60 (2011–)2014Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, D4162T, D4204T5
- Volvo V60 (2011–)2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, B6304T3, B6304T4, B6304T5, D4162T, D4204T5
- Volvo V70 (2008–)2008–2009Nur Motor: B6304T2, B6324S, D4204T
- Volvo V70 (2008–)2010Nur Motor: D4204T
- Volvo V70 (2008–)2012–2013Nur Motor: D4162T
- Volvo V70 (2008–)2014–2015Nur Motor: B4204T11, D4162T, D4204T5
- Volvo XC60 (2009–)2009–2010Nur Motor: B6304T2
- Volvo XC60 (2009–)2011–2013Nur Motor: B6304T4
- Volvo XC60 (2009–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, D4204T5
- Volvo XC70 (2008–)2008Nur Motor: B6324S
- Volvo XC70 (2008–)2009Nur Motor: B6304T2, B6324S
- Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11, D4204T5
- Volvo XC90 (2003–)2005–2006Nur Motor: B8444S
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Nur Motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
The engine control module compares the camshaft position with the crankshaft position using signals from the camshaft sensor and the crankshaft sensor, and adjusts the adaptation if they do not agree. The code concerns bank 1, sensor A, and is set when the adaptation value changes by more than a certain amount.
Mögliche Ursachen
- Incorrectly set camshafts
- Faulty camshaft control valve
- Damaged VVT unit
- Damaged or worn timing chain
- Faulty camshaft sensor or crankshaft sensor
- Poor quality engine oil
Was Sie tun können
- 1Read the code, clear it and road test the car to see whether it returns
- 2If you have a diagnostic tool: read the camshaft adaptation and timing angle in live data with the engine running, and compare with the target value
- 3Check the connectors at the camshaft sensor and the crankshaft sensor for loose or oxidised parts
- 4Use a multimeter to check that the signal wire from the camshaft sensor has no open circuit
- 5Check that the engine oil level is correct and that the oil is clean and of the right quality
- 6If the fault returns: have a workshop check the camshaft basic setting, the control valve and the VVT unit
Symptome, die Sie bemerken können5
- Engine is hard to start
- The car lacks power, especially when pulling away from standstill
- Uneven idle
- Engine hesitates or runs jerkily
- Check engine lamp lit or behaving abnormally
Was der Fehler beeinflussen kann1
- The control module uses a fixed value for the camshaft adaptation
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.