VOLVO
ECM-P001800 - Crankshaft Position - Camshaft Position Correlation - Bank 2 Sensor A. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (15)
- Volvo S60 (2011–)2011–2014Nur Motor: B6304T4
- Volvo S60 (2011–)2015Nur Motor: B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2007Nur Motor: B6324S, B8444S
- Volvo S80 (2007–)2008–2009Nur Motor: B6304T2, B6324S, B8444S
- Volvo V60 (2011–)2011–2014Nur Motor: B6304T4
- Volvo V60 (2011–)2015Nur Motor: B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2008–2009Nur Motor: B6304T2, B6324S
- Volvo XC60 (2009–)2009–2010Nur Motor: B6304T2
- Volvo XC60 (2009–)2011–2015Nur Motor: B6304T4
- Volvo XC70 (2008–)2008Nur Motor: B6324S
- Volvo XC70 (2008–)2009Nur Motor: B6304T2, B6324S
- Volvo XC90 (2003–)2005–2006Nur Motor: B8444S
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S, B8444S
- Volvo XC90 (2003–)2011Nur Motor: B6324S5, B8444S
- Volvo XC90 (2003–)2012–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
The engine control module compares the camshaft position with the crankshaft position and adjusts the adaptation when they do not agree. It is a general fault with no more specific description, and it concerns bank 2, sensor A. The code is set when the adaptation rises or falls beyond a certain value, and
Mögliche Ursachen
- Poor quality engine oil
- Incorrectly set camshafts
- Faulty camshaft control valve
- Damaged VVT unit
- Damaged or worn timing chain
- Camshaft drive has skipped teeth
Was Sie tun können
- 1Read the code and note whether it is active right now or only stored
- 2If you have a diagnostic tool: read the intake camshaft adaptation for bank 2 in live data with the engine running
- 3Check the engine oil level and quality, especially if it may be contaminated
- 4Have a workshop check the camshaft basic setting and that the camshaft drive has not skipped teeth
- 5Have a workshop clean the intake camshaft control valve, or try a new one if that does not help
- 6If the fault returns: have a workshop check the VVT unit
Symptome, die Sie bemerken können5
- Uneven idle
- Engine stalls while driving
- Engine misfires
- Engine is hard to start
- Check engine lamp lit or behaving abnormally
Was der Fehler beeinflussen kann1
- The control module uses a fixed value for the camshaft adaptation
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.