VOLVO
ECM-P001892 - Crankshaft Position - Camshaft Position Correlation - Bank 2 Sensor A. Component Failures. Performance or incorrect operation
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
1 ModellS80 (2007–)
Modelle nach Baujahr und Motor anzeigen (1)
Was bedeutet der Fehlercode?
The engine control module checks that the intake camshaft is in the correct position relative to the crankshaft, and adjusts the adaptation when it is not. The code concerns bank 2, sensor A, which is the intake camshaft, and is set when the adaptation changes too much. It is tested when the engine is started or warm.
Mögliche Ursachen
- Incorrectly set camshafts
- Damaged VVT unit
Was Sie tun können
- 1Read the code, clear it and road test the car to see whether it returns
- 2If you have a diagnostic tool: read the intake camshaft adaptation and timing angle for bank 2 in live data with the engine running
- 3Check the engine oil level and that the oil is clean and of the right quality
- 4Have a workshop remove the control valve for cleaning and check the oil passages in the cylinder head
- 5If cleaning does not solve the fault: have a workshop fit a new control valve
- 6If the fault returns: have a workshop check the VVT unit
Symptome, die Sie bemerken können5
- The car lacks power when pulling away from standstill
- Engine does not start, the starter motor cranks it
- Engine is hard to start and cranks slowly
- Uneven idle
- Engine hesitates or runs jerkily on acceleration and at steady speed
Was der Fehler beeinflussen kann1
- The control module uses a fixed value for the camshaft adaptation
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.