VOLVO
ECM-P003313 - Turbocharger/Supercharger Bypass Valve "A" Control Circuit/Open. General Electrical Failures. Circuit open
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
6 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (11)
- Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3
- Volvo S60 (2011–)2012–2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo S80 (2007–)2011, 2015Nur Motor: B4164T
- Volvo S80 (2007–)2012–2014Nur Motor: B4164T, B4164T2
- Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
- Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T
- Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3
- Volvo V60 (2011–)2012–2015Nur Motor: B4164T, B4164T2, B4164T3
- Volvo V70 (2008–)2011Nur Motor: B4164T
- Volvo V70 (2008–)2012–2015Nur Motor: B4164T, B4164T2
Was bedeutet der Fehlercode?
The code concerns bypass valve A, which acts as the turbo's blow-off valve to reduce noise bursts when the accelerator is released quickly. The engine control module monitors the control signal to the valve, and the code is set when the signal is missing.
Mögliche Ursachen
- Open circuit in the signal wire
- Open circuit in the supply wire
- Faulty bypass valve
Was Sie tun können
- 1Read the code, clear it and road test the car to see whether it returns
- 2Use a multimeter to check that the wires to the bypass valve have no open circuit
- 3Look for chafed wiring and check the connector at the bypass valve for loose parts
- 4If you have a diagnostic tool: activate the bypass valve and check that it responds
- 5If the fault returns: have a workshop check the bypass valve
Symptome, die Sie bemerken können2
- Unusual noise when the accelerator is released
- Unusual noise while driving, not clear when it occurs
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.