Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P003A16
    VOLVO

    ECM-P003A16 - Turbocharger/Supercharger Boost Control A Position Exceeded Learning Limit. General Electrical Failures. Circuit voltage below threshold

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    2 Modelle

    S80 (2007–), V70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (2)
    • Volvo S80 (2007–)2008–2010Nur Motor: D4204T
    • Volvo V70 (2008–)2008–2010Nur Motor: D4204T

    Was bedeutet der Fehlercode?

    The engine control module uses the turbo control valve to keep the correct boost pressure in the inlet manifold. It compares the signal from the turbo position sensor with how the turbo is being commanded, and here the signal is too low for that position.

    Mögliche Ursachen

    • Vacuum hoses are leaking
    • The turbo control valve is sticking
    • The turbo control valve is damaged
    • The position sensor is damaged

    Was Sie tun können

    1. 1Start the engine and read the fault code with a diagnostic tool, noting whether it is active now or only stored
    2. 2Check the vacuum hoses to the turbo control valve for cracks, loose connections and leaks
    3. 3Check the connector at the turbo position sensor for looseness, corrosion and oxidation
    4. 4With a multimeter, check that the position sensor wiring has no open circuit and no short to ground
    5. 5Have a workshop with diagnostic equipment check the movement of the turbo control valve and whether the position sensor gives the correct signal

    Symptome, die Sie bemerken können2

    • The Check engine (malfunction indicator) lamp lights up
    • Other warning lamps or warning chimes may also be triggered

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.