Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P005300
    VOLVO

    ECM-P005300 - HO2S Heater Resistance (Bank 1, Sensor 1). General Failure Information. No sub type information

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    9 Modelle

    C30 (2007–2013), S40 (2004–2013), S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V50 (2004–2013), V60 (2011–), V70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (9)
    • Volvo C30 (2007–2013)2011–2013Nur Motor: D4162T
    • Volvo S40 (2004–2013)2011–2012Nur Motor: D4162T
    • Volvo S60 (2011–)2011–2015Nur Motor: D4162T
    • Volvo S80 (2007–)2012–2015Nur Motor: D4162T
    • Volvo V40 (2013–)2013–2015Nur Motor: D4162T
    • Volvo V40 Cross Country (2013–)2013–2015Nur Motor: D4162T
    • Volvo V50 (2004–2013)2011–2012Nur Motor: D4162T
    • Volvo V60 (2011–)2011–2015Nur Motor: D4162T
    • Volvo V70 (2008–)2012–2015Nur Motor: D4162T

    Was bedeutet der Fehlercode?

    The oxygen sensor gives the engine control module information about the fuel and air mixture. The code concerns the signal to the preheating of the oxygen sensor on bank 1, sensor 1, which is wrong when the fault is set.

    Mögliche Ursachen

    • Contact resistance or oxidation in the terminals
    • Open circuit or short circuit in the wiring
    • Damaged oxygen sensor
    • Damaged engine control module

    Was Sie tun können

    1. 1Make sure the fuses are intact. Their location is given in the instruction manual
    2. 2Read the fault code with a diagnostic tool with the ignition in position II and note whether it is active
    3. 3Check the connector to the oxygen sensor on bank 1 sensor 1 for contact resistance and oxidation
    4. 4With a multimeter, check that the wiring to the sensor has no open circuit and no short to ground
    5. 5Replace the oxygen sensor if the wiring is intact but the fault remains
    6. 6Have a workshop with diagnostic equipment check the engine control module if the sensor and wiring are intact

    Symptome, die Sie bemerken können2

    • The Check engine (malfunction indicator) lamp lights up or behaves abnormally
    • No other noticeable symptoms for the driver

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.