Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P00531E
    VOLVO

    ECM-P00531E - HO2S Heater Resistance (Bank 1, Sensor 1). General Electrical Failures. Circuit resistance out of range

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    6 Modelle

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (11)
    • Volvo S60 (2011–)2011Nur Motor: B4164T, B4164T3
    • Volvo S60 (2011–)2012–2015Nur Motor: B4164T, B4164T2, B4164T3
    • Volvo S80 (2007–)2011, 2015Nur Motor: B4164T
    • Volvo S80 (2007–)2012–2014Nur Motor: B4164T, B4164T2
    • Volvo V40 (2013–)2013Nur Motor: B4164T, B4164T3
    • Volvo V40 (2013–)2014–2015Nur Motor: B4164T, B4164T3, B4164T4
    • Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B4164T
    • Volvo V60 (2011–)2011Nur Motor: B4164T, B4164T3
    • Volvo V60 (2011–)2012–2015Nur Motor: B4164T, B4164T2, B4164T3
    • Volvo V70 (2008–)2011Nur Motor: B4164T
    • Volvo V70 (2008–)2012–2015Nur Motor: B4164T, B4164T2

    Was bedeutet der Fehlercode?

    The engine control module finds that the control of the heater element in the front oxygen sensor on bank 1, sensor 1, has not worked for a certain period. The code belongs to electrical faults where the resistance is wrong.

    Mögliche Ursachen

    • Oxidised connectors with raised contact resistance
    • The front oxygen sensor is damaged

    Was Sie tun können

    1. 1Make sure the fuses are intact. Their location is on the fuse chart or in the instruction manual
    2. 2Read the fault code with a diagnostic tool with the engine running and see whether it is active
    3. 3Check the connector on the front oxygen sensor for bank 1 sensor 1 for oxidation and contact resistance
    4. 4With a multimeter, check that the wiring to the sensor has no open circuit and no short to ground or supply
    5. 5Replace the front oxygen sensor if the fault remains after checking the connector and wiring
    6. 6Have a workshop with diagnostic equipment check the control of the heater element if the fault comes back

    Symptome, die Sie bemerken können1

    • The Check engine lamp lights up or behaves abnormally

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.