VOLVO
ECM-P005329 - HO2S Heater Resistance (Bank 1, Sensor 1). General Signal Failures. Signal signal invalid
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
3 ModelleS60 (2011–), S80 (2007–), V70 (2008–)
Modelle nach Baujahr und Motor anzeigen (9)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
- Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10
Was bedeutet der Fehlercode?
The code concerns the heater element control of the front oxygen sensor on bank 1, sensor 1, which has been missing for a certain time. The signal is then treated as invalid. The causes are contact resistance in the connectors or a damaged sensor.
Mögliche Ursachen
- Contact resistance and oxidation in the connectors
- Damaged front heated oxygen sensor
Was Sie tun können
- 1Look at the oxygen sensor connector for oxidation and contact resistance, and correct what you find
- 2Rust solvent spray or grease does not belong in the oxygen sensor connector
- 3Read the fault code with a diagnostic tool and note whether it is active or only stored
- 4With a multimeter, check that the wiring to the sensor has no open circuit
- 5If the connector and wiring are intact but the fault remains, replace the front oxygen sensor
Symptome, die Sie bemerken können1
- The malfunction indicator lamp lights up
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.