Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P007117
    VOLVO

    ECM-P007117 - Ambient Air Temperature Sensor Range/Performance. General Electrical Failures. Circuit voltage above threshold

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    3 Modelle

    S60 (2011–), S80 (2007–), V70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (9)
    • Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
    • Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
    • Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
    • Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
    • Volvo S80 (2007–)2012Nur Motor: B5254T10
    • Volvo V70 (2008–)2008Nur Motor: B5254T6
    • Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
    • Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
    • Volvo V70 (2008–)2012Nur Motor: B5254T10

    Was bedeutet der Fehlercode?

    The code is set when the outside temperature sensor shows a temperature at start that is too high compared with the other sensors. The engine control module then stores the readings from the outside, intake and engine temperature sensors at that moment. Although the code names high voltage, it concerns the mismatch between the sensors.

    Mögliche Ursachen

    • Damaged outside temperature sensor
    • Oxidised connections with contact resistance

    Was Sie tun können

    1. 1Read the fault code with a diagnostic tool with the engine running and note whether it is active
    2. 2Make sure the fuses are intact. Their location is in the instruction manual
    3. 3If you have a diagnostic tool, compare the outside temperature in live data with the intake temperature after starting. The readings should be roughly the same
    4. 4Check the connector to the outside temperature sensor for contact resistance and oxidation
    5. 5Have a workshop check the sensor if the fault remains after checking the connector and wiring

    Symptome, die Sie bemerken können1

    • The outside temperature is displayed as too high

    Was der Fehler beeinflussen kann1

    • The outside temperature is calculated from a model

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.