Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P007122
    VOLVO

    ECM-P007122 - Ambient Air Temperature Sensor Circuit "A" Range/Performance. General Signal Failures. Signal too high

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.

    Gilt für folgende Modelle:

    8 Modelle

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (8)
    • Volvo S60 (2011–)2014–2015Nur Motor: D4204T5
    • Volvo S80 (2007–)2014–2015Nur Motor: D4204T5
    • Volvo V40 (2013–)2015Nur Motor: D4204T14
    • Volvo V40 Cross Country (2013–)2015Nur Motor: D4204T14
    • Volvo V60 (2011–)2014–2015Nur Motor: D4204T5
    • Volvo V70 (2008–)2014–2015Nur Motor: D4204T5
    • Volvo XC60 (2009–)2014–2015Nur Motor: D4204T5
    • Volvo XC70 (2008–)2014–2015Nur Motor: D4204T5

    Was bedeutet der Fehlercode?

    The engine control module monitors outside temperature sensor A and, after a long stop, checks its reading against other temperatures in the car. The code is set when the signal is too high and the outside temperature therefore deviates too much from the other values.

    Mögliche Ursachen

    • Contact resistance in the connection
    • Outside temperature sensor A is damaged

    Was Sie tun können

    1. 1If you have a diagnostic tool, read the outside temperature in live data and compare it with the other temperatures in the car. The values should roughly agree
    2. 2Read the fault code with a diagnostic tool and note whether it is active or only stored
    3. 3Make sure the fuses are intact. Their location is given in the instruction manual
    4. 4With the ignition off, check the sensor connector for contact resistance and oxidation
    5. 5Have a workshop check the sensor if the fault remains after the connector has been checked

    Symptome, die Sie bemerken können1

    • No noticeable symptoms for the driver

    Was der Fehler beeinflussen kann1

    • A calculated value is used for the outside temperature

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.