ECM-P007164
VOLVO
ECM-P007164 - Ambient Air Temperature Sensor Range/Performance. Algorithm Based Failures. Signal plausibility failure
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
9 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–)
Modelle nach Baujahr und Motor anzeigen (22)
- Volvo S60 (2011–)2011–2012Nur Motor: B6304T4
- Volvo S60 (2011–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2010Nur Motor: B6304T2
- Volvo S80 (2007–)2011–2012, 2015Nur Motor: B6304T4
- Volvo S80 (2007–)2013–2014Nur Motor: B5254T12, B5254T14, B6304T4
- Volvo V40 (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Nur Motor: B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V60 (2011–)2011–2012Nur Motor: B6304T4
- Volvo V60 (2011–)2013Nur Motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Nur Motor: B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Nur Motor: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Nur Motor: B6304T2
- Volvo V70 (2008–)2011–2012Nur Motor: B6304T4
- Volvo V70 (2008–)2013–2015Nur Motor: B5204T9, B6304T4
- Volvo XC60 (2009–)2010Nur Motor: B6304T2
- Volvo XC60 (2009–)2011–2014Nur Motor: B6304T4
- Volvo XC60 (2009–)2015Nur Motor: B5204T9, B5254T12, B5254T14, B6304T4
- Volvo XC70 (2008–)2010Nur Motor: B6304T2
- Volvo XC70 (2008–)2011–2015Nur Motor: B6304T4
Was bedeutet der Fehlercode?
An implausible reading from the sensor in the left door mirror is detected when its value differs too far from the intake, fuel or coolant temperature. This applies once the engine has run warm and has cooled properly.
Mögliche Ursachen
- Poor contact or contact resistance in the connector
- The outside temperature sensor is damaged
Was Sie tun können
- 1If you have a diagnostic tool, read the outside temperature in live data and compare it with the fuel temperature after the car has cooled
- 2Read the fault code with a diagnostic tool and note whether it is active
- 3With the ignition off, go through the connection to the sensor in the left door mirror and look for oxidation
- 4If the connector is clean and intact but the fault remains, the sensor is damaged and needs replacing
- 5Make sure the fuses are intact. Their location is given in the instruction manual
Symptome, die Sie bemerken können1
- The malfunction indicator lamp lights up
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.