Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P007284
    VOLVO

    ECM-P007284 - Ambient Air Temperature Sensor Circuit Low Input. Bus Signal / Message Failures. Signal below allowable range

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    3 Modelle

    S60 (2011–), S80 (2007–), V70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (9)
    • Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
    • Volvo S80 (2007–)2007–2008Nur Motor: B5254T6
    • Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8
    • Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8
    • Volvo S80 (2007–)2012Nur Motor: B5254T10
    • Volvo V70 (2008–)2008Nur Motor: B5254T6
    • Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
    • Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
    • Volvo V70 (2008–)2012Nur Motor: B5254T10

    Was bedeutet der Fehlercode?

    Although the code is named a bus or message fault, it concerns the outside temperature signal being below the sensor's allowed range. The engine control module compares the signal with the sensor's operating range and sets the code when it is too low.

    Mögliche Ursachen

    • The sensor is damaged
    • The signal lead has a short circuit to ground
    • There is an open circuit in the signal lead

    Was Sie tun können

    1. 1Read the fault code with a diagnostic tool with the ignition in position II and note whether it is active or only stored
    2. 2Make sure the fuses are intact. Their location is on the fuse chart or in the instruction manual
    3. 3If you have a diagnostic tool, read the outside temperature in live data with the ignition on and see whether it is too low compared with the surroundings
    4. 4With the ignition off, check the sensor connector and connections for oxidation and loose contacts
    5. 5With a multimeter, check that the signal lead is not short-circuited to ground and has no open circuit. Have a workshop check the sensor if the fault remains

    Symptome, die Sie bemerken können2

    • The outside temperature gauge does not work
    • The outside temperature is displayed as too low

    Was der Fehler beeinflussen kann1

    • A predefined value is used instead

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.