Zum Inhalt springen
    OBD Tuning
    SENDEN SIE AN UNS
    SENDEN SIE AN UNS
    Startseite
    Fehlercodes
    VOLVO
    ECM-P007400
    VOLVO

    ECM-P007400 - Ambient Air Temperature Sensor Circuit Intermittent/Erratic. General Failure Information. No sub type information

    System

    Motorsteuergerät (ECM)

    Volvo-Modelle, für die dieser Fehlercode gilt

    Gilt für folgende Modelle:

    6 Modelle

    S60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V70 (2008–)

    Modelle nach Baujahr und Motor anzeigen (8)
    • Volvo S60 (2011–)2011–2015Nur Motor: D4162T
    • Volvo S80 (2007–)2008–2010Nur Motor: D4204T
    • Volvo S80 (2007–)2012–2015Nur Motor: D4162T
    • Volvo V40 (2013–)2013–2015Nur Motor: D4162T
    • Volvo V40 Cross Country (2013–)2013–2015Nur Motor: D4162T
    • Volvo V60 (2011–)2011–2015Nur Motor: D4162T
    • Volvo V70 (2008–)2008–2010Nur Motor: D4204T
    • Volvo V70 (2008–)2012–2015Nur Motor: D4162T

    Was bedeutet der Fehlercode?

    The code is intermittent, meaning the fault comes and goes rather than being present all the time. The engine control module measures outside temperature with the sensor in the left mirror, and the code is set when the signal is irregular or implausible.

    Mögliche Ursachen

    • Contact resistance or oxidation in the connectors
    • The atmospheric pressure sensor is damaged
    • The outside temperature sensor is damaged

    Was Sie tun können

    1. 1Read the fault status with a diagnostic tool. Fault found means the fault is present now, while No fault found means the fault is intermittent and not active at the moment
    2. 2Make sure the fuses are intact. Their location is given in the instruction manual
    3. 3With the ignition off, check the sensor connector in the left mirror for contact resistance and oxidation. Loose contacts often give irregular readings
    4. 4If you have a diagnostic tool, follow the outside temperature in live data for a while. A value that jumps without reason points to a poor contact or a moving wire
    5. 5Have a workshop check the sensor if the fault comes back

    Symptome, die Sie bemerken können1

    • The outside temperature gauge shows the wrong value or does not work

    Was der Fehler beeinflussen kann1

    • A calculated value is used

    Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.

    OBD Tuning

    Schwedens führendes Kompetenzzentrum für Automotorelektronik. Wir bieten professionelle ECU-Optimierung, Steuergerätereparatur und Diagnose mit 12-monatiger Garantie.

    Dienstleistungen

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    Datenbank & Diagnose

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    ECU-Hersteller

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    Unternehmen

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    • Motoroptimierung
    • ECU-Reparatur
    • Modul-Klonen
    • Kombiinstrument
    • SRS / Airbag
    • Wegfahrsperre

    • ECU-Datenbank
    • DTC Fehlercodekatalog
    • Diagnoseanleitungen & Messwerte
    • KI-Fehlercode-Analysator
    • Neuigkeiten

    • Bosch
    • Continental
    • Delphi
    • Delco
    • Denso
    • Magneti Marelli
    • Siemens / VDO
    • Keihin
    • Temic

    • Über uns
    • Kontakt
    • Workshop-Partner
    • Versandanleitung
    • Garantie
    • Häufig gestellte Fragen
    • AGB
    • Datenschutz
    • Sitemap

    Besuchen Sie uns

    Gjuterigatan 29, Karlstad

    Rufen Sie uns an

    054-830 480

    Schreiben Sie uns eine E-Mail

    service@obdtuning.se

    © 2026 OBD Tuning Karlstad. Alle Rechte vorbehalten.