ECM-P007B21
VOLVO
ECM-P007B21 - Charge Air Cooler Temperature Sensor Circuit Range/Performance (Bank 1). General Signal Failures. Signal too low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–)
Modelle nach Baujahr und Motor anzeigen (12)
- Volvo S60 (2011–)2011Nur Motor: B4204T6, B4204T7
- Volvo S60 (2011–)2012–2014Nur Motor: B4204T7
- Volvo S80 (2007–)2010Nur Motor: B4204T6
- Volvo S80 (2007–)2011–2014Nur Motor: B4204T6, B4204T7
- Volvo V60 (2011–)2011Nur Motor: B4204T6, B4204T7
- Volvo V60 (2011–)2012–2014Nur Motor: B4204T7
- Volvo V70 (2008–)2010Nur Motor: B4204T6
- Volvo V70 (2008–)2011Nur Motor: B4204T6, B4204T7
- Volvo V70 (2008–)2012–2014Nur Motor: B4204T7
- Volvo XC60 (2009–)2010Nur Motor: B4204T6
- Volvo XC60 (2009–)2011–2012Nur Motor: B4204T6, B4204T7
- Volvo XC60 (2009–)2013–2015Nur Motor: B4204T7
Was bedeutet der Fehlercode?
The boost pressure sensor (TMAP) measures both boost pressure and temperature. The fault code is set when the temperature signal is unreasonably low. Possible causes are a poor connection or a damaged sensor.
Mögliche Ursachen
- Loose connection, contact resistance or oxidation in the connector
- Damaged boost pressure sensor (TMAP)
Was Sie tun können
- 1Check that the boost pressure sensor connector is fully seated and free from oxidation
- 2Look for cracks or damage on the sensor housing and the wire
- 3If you have a diagnostic tool: after the engine has been off for a longer period, read the sensor temperature in live data and compare it with the ambient temperature
- 4If the connector is in good condition but the temperature still differs, have a workshop check the boost pressure sensor
Symptome, die Sie bemerken können1
- No noticeable symptoms for the driver
Was der Fehler beeinflussen kann1
- The engine control module uses a calculated value instead of the measured temperature
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.