VOLVO
ECM-P008000 - Exhaust Valve Control Circuit High (Bank 1). General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
10 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (28)
- Volvo S60 (2011–)2011–2012Nur Motor: B5254T5
- Volvo S60 (2011–)2013Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo S60 (2011–)2014–2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B5254T14
- Volvo S80 (2007–)2007–2008Nur Motor: B5254T6, B8444S
- Volvo S80 (2007–)2009Nur Motor: B5254T6, B5254T8, B8444S
- Volvo S80 (2007–)2010–2011Nur Motor: B5254T10, B5254T11, B5254T8, B8444S
- Volvo S80 (2007–)2012Nur Motor: B5254T10
- Volvo S80 (2007–)2013Nur Motor: B5254T12, B5254T14
- Volvo S80 (2007–)2014Nur Motor: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14
- Volvo S80 (2007–)2015Nur Motor: B4204T11, B4204T12, B4204T15
- Volvo V40 (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Nur Motor: B4204T11, B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B4164T, D4162T, D4204T14, D5204T6
- Volvo V60 (2011–)2013Nur Motor: B5204T8, B5204T9
- Volvo V60 (2011–)2014Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12
- Volvo V60 (2011–)2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2008Nur Motor: B5254T6
- Volvo V70 (2008–)2009Nur Motor: B5254T6, B5254T8
- Volvo V70 (2008–)2010–2011Nur Motor: B5254T10, B5254T11
- Volvo V70 (2008–)2012Nur Motor: B5254T10
- Volvo V70 (2008–)2013Nur Motor: B5204T9
- Volvo V70 (2008–)2014–2015Nur Motor: B4204T11, B5204T9
- Volvo XC60 (2009–)2014Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9
- Volvo XC60 (2009–)2015Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B5254T14
- Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11
- Volvo XC90 (2003–)2005–2011Nur Motor: B8444S
Was bedeutet der Fehlercode?
The engine control module (ECM) adjusts the exhaust camshaft position with a changeover valve on bank 1, the cylinder row nearest the front. The fault code is set when the control signal to the valve is too high. The causes are a signal wire shorted to voltage or a damaged valve.
Mögliche Ursachen
- Signal wire to the changeover valve shorted to voltage
- Damaged exhaust camshaft changeover valve
Was Sie tun können
- 1Read off the fault code and check whether the fault is active right now or has only been present earlier
- 2Check that the fuses for the engine control circuits are intact
- 3Use a multimeter to check whether the signal wire to the exhaust valve has contact with voltage with the ignition off
- 4Check the connector at the exhaust valve and the wiring leading to it
- 5If you have a diagnostic tool, activate the exhaust valve and listen or feel for it responding
- 6If the fault returns after these checks, have a workshop check the valve
Symptome, die Sie bemerken können4
- Check engine lamp (MIL) lights up
- Uneven idle
- Poor performance and lack of power
- The engine can stall while driving, during acceleration, deceleration or at steady speed
Was der Fehler beeinflussen kann1
- Exhaust camshaft control is switched off
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.