VOLVO
ECM-P010013 - Mass or Volume Air Flow Circuit. General Electrical Failures. Circuit open
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
5 ModelleS80 (2007–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (6)
- Volvo S80 (2007–)2007–2009Nur Motor: D5244T4, D5244T5
- Volvo V70 (2008–)2008–2009Nur Motor: D5244T4, D5244T5
- Volvo XC60 (2009–)2009Alle Motoren außer: B6304T2
- Volvo XC70 (2008–)2008Alle Motoren außer: B6324S
- Volvo XC70 (2008–)2009Nur Motor: D5244T4, D5244T5
- Volvo XC90 (2003–)2013–2014Nur Motor: D5244T18, D5244T5
Was bedeutet der Fehlercode?
The ECM checks the signal ground to the mass air flow sensor and stores the code when it is incorrect. This fault is an open circuit, meaning a wire has broken or a connection has lost contact. It can be in the connections, the supply or the ground.
Mögliche Ursachen
- Contact resistance, corrosion or a break in the connections
- Break in the voltage supply
- Break in the ground wire
Was Sie tun können
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check that the connectors at the mass air flow sensor and in the connections are fully seated and free from corrosion
- 3With a multimeter, check that the supply and ground wires to the sensor have continuity
- 4Look for broken or chafed wiring between the sensor and the engine control module
- 5If the fault remains, have a workshop check the connections and the sensor
Symptome, die Sie bemerken können1
- Engine warning lamp (check engine) lit or behaving abnormally
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.