VOLVO
ECM-P010192 - Mass or Volume Air Flow A Circuit Range/Performance. Component Failures. Performance or incorrect operation
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
10 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (24)
- Volvo S60 (2011–)2011–2012Nur Motor: B6304T4
- Volvo S60 (2011–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2010Nur Motor: B6304T2, B6324S
- Volvo S80 (2007–)2011–2012, 2015Nur Motor: B6304T4, B6324S5
- Volvo S80 (2007–)2013–2014Nur Motor: B5254T12, B5254T14, B6304T4, B6324S5
- Volvo V40 (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Nur Motor: B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V60 (2011–)2011–2012Nur Motor: B6304T4
- Volvo V60 (2011–)2013Nur Motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Nur Motor: B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Nur Motor: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Nur Motor: B6304T2, B6324S
- Volvo V70 (2008–)2011–2012Nur Motor: B6304T4, B6324S5
- Volvo V70 (2008–)2013–2014Nur Motor: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Nur Motor: B5204T9, B6304T4
- Volvo XC60 (2009–)2010Nur Motor: B6304T2, B6324S
- Volvo XC60 (2009–)2011–2014Nur Motor: B6304T4, B6324S5
- Volvo XC60 (2009–)2015Nur Motor: B5204T9, B5254T12, B5254T14, B6304T4, B6324S5
- Volvo XC70 (2008–)2010Nur Motor: B6304T2, B6324S
- Volvo XC70 (2008–)2011–2015Nur Motor: B6304T4, B6324S5
- Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
The ECM measures the air mass in the intake pipe with a sensor and stores the code when the mass air flow sensor signal is too low. While the fault is present, a value calculated from engine speed and inlet pressure is used.
Mögliche Ursachen
- Signal wire shorted to ground
- Break in the signal wire
- Damaged mass air flow sensor
Was Sie tun können
- 1Read and note the code, clear it and road test to see whether it returns
- 2With the ignition on, read the air mass sensor signal in live data and check whether the fault is still present
- 3With the engine warm and idling, read the air mass sensor value and check that the air flow is plausible
- 4With a multimeter, check that the signal wire has no break and is not shorted to ground
- 5If the fault remains, have a workshop check the mass air flow sensor
Symptome, die Sie bemerken können1
- Engine warning lamp (check engine) lit or behaving abnormally
Was der Fehler beeinflussen kann1
- A value calculated from engine speed and inlet pressure is used
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.