VOLVO
ECM-P010500 - Manifold Absolute Pressure/BARO Circuit. General Failure Information. No sub type information
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Gilt für folgende Modelle:
7 ModelleS60 (2011–), S80 (2007–), V60 (2011–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (13)
- Volvo S60 (2011–)2011–2014Nur Motor: B6304T4
- Volvo S60 (2011–)2015Nur Motor: B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2007Nur Motor: B6324S
- Volvo S80 (2007–)2008–2009Nur Motor: B6304T2, B6324S
- Volvo V60 (2011–)2011–2014Nur Motor: B6304T4
- Volvo V60 (2011–)2015Nur Motor: B6304T3, B6304T4, B6304T5
- Volvo V70 (2008–)2008–2009Nur Motor: B6304T2, B6324S
- Volvo XC60 (2009–)2009–2010Nur Motor: B6304T2
- Volvo XC60 (2009–)2011–2015Nur Motor: B6304T4
- Volvo XC70 (2008–)2008Nur Motor: B6324S
- Volvo XC70 (2008–)2009Nur Motor: B6304T2, B6324S
- Volvo XC90 (2003–)2007–2010Nur Motor: B6324S
- Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
The ECM measures the pressure in the intake pipe with an air pressure sensor. The code is stored when the reading is wrong for a set time or over two or more consecutive drive cycles.
Mögliche Ursachen
- Break in the signal or ground wire
- Contact resistance and oxidation in the connections
- Signal wire shorted to supply voltage
- Air pressure sensor in the intake pipe is damaged
Was Sie tun können
- 1Read and note the code, clear it and road test to see whether it returns
- 2Check the hoses and joints on the intake pipe for leaks and damage
- 3Check that the connector at the air pressure sensor sits firmly and is free from oxidation and play
- 4With a multimeter, check that the signal and ground wires to the sensor have no break
- 5If you have diagnostic equipment, compare the intake pressure in live data with the ignition on against the ambient pressure and check that the reading is plausible
- 6If the fault remains, have a workshop check the sensor
Symptome, die Sie bemerken können1
- The eco indicator lamp in the instrument panel lights up
Was der Fehler beeinflussen kann1
- The control module uses a fixed value for intake pressure
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.