ECM-P011123 - Intake Air Temperature Sensor 1 Circuit Range/Performance (Bank 1). General Signal Failures. Signal stuck low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
10 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (24)
- Volvo S60 (2011–)2011–2012Nur Motor: B6304T4
- Volvo S60 (2011–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2015Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T3, B6304T4, B6304T5
- Volvo S80 (2007–)2010Nur Motor: B6304T2, B6324S
- Volvo S80 (2007–)2011–2012, 2015Nur Motor: B6304T4, B6324S5
- Volvo S80 (2007–)2013–2014Nur Motor: B5254T12, B5254T14, B6304T4, B6324S5
- Volvo V40 (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Nur Motor: B5204T8, B5204T9
- Volvo V40 Cross Country (2013–)2013–2015Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V60 (2011–)2011–2012Nur Motor: B6304T4
- Volvo V60 (2011–)2013Nur Motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Nur Motor: B5204T8, B5204T9, B5254T12, B6304T4
- Volvo V60 (2011–)2015Nur Motor: B5204T9, B5254T12, B6304T3, B6304T4, B6304T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Nur Motor: B6304T2, B6324S
- Volvo V70 (2008–)2011–2012Nur Motor: B6304T4, B6324S5
- Volvo V70 (2008–)2013–2014Nur Motor: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2015Nur Motor: B5204T9, B6304T4
- Volvo XC60 (2009–)2010Nur Motor: B6304T2, B6324S
- Volvo XC60 (2009–)2011–2014Nur Motor: B6304T4, B6324S5
- Volvo XC60 (2009–)2015Nur Motor: B5204T9, B5254T12, B5254T14, B6304T4, B6324S5
- Volvo XC70 (2008–)2010Nur Motor: B6304T2, B6324S
- Volvo XC70 (2008–)2011–2015Nur Motor: B6304T4, B6324S5
- Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
The engine control module (ECM) compares the intake air temperature sensor reading with the engine, fuel and outside temperatures. Once the engine has stood switched off for a long time, the sensor signal has stayed stuck low, which does not match the other temperatures. The sensor is built into the mass air flow sensor, so the fault concerns the same unit that measures airflow.
Mögliche Ursachen
- Increased contact resistance in the connector to the mass air flow sensor
- Damaged air temperature sensor inside the mass air flow sensor
Was Sie tun können
- 1Read and note the fault code, clear it, then road test the vehicle to see whether it returns
- 2Check the connector to the mass air flow sensor: it should be firmly seated and free from corrosion and moisture
- 3If you have a diagnostic tool: compare air temperature in live data with coolant and fuel temperature. An unreasonable value means the fault is still present
- 4If the connector is in order and the fault remains, have a workshop check or replace the mass air flow sensor
Symptome, die Sie bemerken können1
- The Check engine light comes on or behaves abnormally
Was der Fehler beeinflussen kann1
- The control module sets the intake air temperature equal to the fuel temperature
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.