VOLVO
ECM-P011621 - Engine Coolant Temperature Sensor 1 Circuit Range/Performance. General Signal Failures. Signal too low
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
10 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (31)
- Volvo S60 (2011–)2011–2012Nur Motor: B6304T4
- Volvo S60 (2011–)2013Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2014Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2010Nur Motor: B6304T2, B6324S
- Volvo S80 (2007–)2011–2012Nur Motor: B6304T4, B6324S5
- Volvo S80 (2007–)2013Nur Motor: B5254T12, B5254T14, B6304T4, B6324S5
- Volvo S80 (2007–)2014Nur Motor: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S5, D4204T5
- Volvo S80 (2007–)2015Alle Motoren außer: B4164T, B6324S4, D4162T, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Nur Motor: B4204T11, B5204T8, B5204T9, D4204T14
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B4164T, D4162T, D5204T6
- Volvo V60 (2011–)2011–2012Nur Motor: B6304T4
- Volvo V60 (2011–)2013Nur Motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4, D4204T5
- Volvo V60 (2011–)2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Nur Motor: B6304T2, B6324S
- Volvo V70 (2008–)2011–2012Nur Motor: B6304T4, B6324S5
- Volvo V70 (2008–)2013Nur Motor: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2014Nur Motor: B4204T11, B5204T9, B6304T4, B6324S5, D4204T5
- Volvo V70 (2008–)2015Nur Motor: B4204T11, B5204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2010Nur Motor: B6304T2, B6324S
- Volvo XC60 (2009–)2011–2013Nur Motor: B6304T4, B6324S5
- Volvo XC60 (2009–)2014Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, B6324S5, D4204T5
- Volvo XC60 (2009–)2015Alle Motoren außer: B4204T7, B6324S4, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Nur Motor: B6304T2, B6324S
- Volvo XC70 (2008–)2011–2013Nur Motor: B6304T4, B6324S5
- Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11, B6304T4, B6324S5, D4204T5
- Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
The control module watches engine temperature with the coolant temperature sensor and compares it with the air temperature in the mass air flow sensor, the boost pressure sensor temperature, the outside temperature and the fuel temperature. If the coolant reading deviates too much from these values, the fault code is set.
Mögliche Ursachen
- Contact resistance in the connector
- Damaged coolant temperature sensor
Was Sie tun können
- 1Read the diagnostic status and fault status for the code with the ignition on. Check whether the fault is active, then clear the code
- 2Check the connector at the coolant temperature sensor for contact resistance and oxidation
- 3If you have a diagnostic tool: read the coolant temperature in live data and check that it is reasonable. An unreasonable value means the fault is permanent
- 4Check the coolant level and the antifreeze protection. Take care, as the electric cooling fan can run even when the ignition is off
- 5If the connector is in order and the fault remains, have a workshop check or replace the sensor
Symptome, die Sie bemerken können5
- The Check engine light comes on or behaves abnormally
- The engine is difficult to start
- The engine idles unevenly
- The engine stalls
- The electric cooling fan runs all the time
Was der Fehler beeinflussen kann3
- The control module uses the intake air temperature at start-up if it has no fault of its own
- The engine temperature is calculated using a model after start-up
- The electric cooling fan runs at a fixed, predefined speed
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.