VOLVO
ECM-P011622 - Engine Coolant Temperature Sensor 1 Circuit Range/Performance. General Signal Failures. Signal too high
System
Motorsteuergerät (ECM)
Volvo-Modelle, für die dieser Fehlercode gilt
Dieser Fehlercode hat je nach Modell, Modelljahr oder Motor unterschiedliche Bedeutungen. Wählen Sie die Bedeutung, die für Ihr Fahrzeug gilt.
Gilt für folgende Modelle:
10 ModelleS60 (2011–), S80 (2007–), V40 (2013–), V40 Cross Country (2013–), V60 (2011–), V60 Cross Country (2015–), V70 (2008–), XC60 (2009–), XC70 (2008–), XC90 (2003–)
Modelle nach Baujahr und Motor anzeigen (31)
- Volvo S60 (2011–)2011–2012Nur Motor: B6304T4
- Volvo S60 (2011–)2013Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14, B6304T4
- Volvo S60 (2011–)2014Alle Motoren außer: B4164T, B4164T2, B4164T3, B4204T7, D4162T, D5204T3, D5204T7, D5244T11, D5244T15
- Volvo S60 (2011–)2015Alle Motoren außer: B4164T, B4164T2, B4164T3, D4162T, D5204T3, D5204T7, D5244T11, D5244T15, D5244T23
- Volvo S80 (2007–)2010Nur Motor: B6304T2, B6324S
- Volvo S80 (2007–)2011–2012Nur Motor: B6304T4, B6324S5
- Volvo S80 (2007–)2013Nur Motor: B5254T12, B5254T14, B6304T4, B6324S5
- Volvo S80 (2007–)2014Nur Motor: B4204T11, B4204T12, B4204T15, B5254T12, B5254T14, B6304T4, B6324S5, D4204T5
- Volvo S80 (2007–)2015Alle Motoren außer: B4164T, B6324S4, D4162T, D5204T3, D5244T15
- Volvo V40 (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 (2013–)2015Nur Motor: B4204T11, B5204T8, B5204T9, D4204T14
- Volvo V40 Cross Country (2013–)2013–2014Nur Motor: B5204T8, B5204T9, B5254T12, B5254T14
- Volvo V40 Cross Country (2013–)2015Alle Motoren außer: B4164T, D4162T, D5204T6
- Volvo V60 (2011–)2011–2012Nur Motor: B6304T4
- Volvo V60 (2011–)2013Nur Motor: B5204T8, B5204T9, B6304T4
- Volvo V60 (2011–)2014Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T8, B5204T9, B5254T12, B6304T4, D4204T5
- Volvo V60 (2011–)2015Nur Motor: B4204T11, B4204T12, B4204T15, B4204T9, B5204T9, B5254T12, B6304T3, B6304T4, B6304T5, D4204T5
- Volvo V60 Cross Country (2015–)2015
- Volvo V70 (2008–)2010Nur Motor: B6304T2, B6324S
- Volvo V70 (2008–)2011–2012Nur Motor: B6304T4, B6324S5
- Volvo V70 (2008–)2013Nur Motor: B5204T9, B6304T4, B6324S5
- Volvo V70 (2008–)2014Nur Motor: B4204T11, B5204T9, B6304T4, B6324S5, D4204T5
- Volvo V70 (2008–)2015Nur Motor: B4204T11, B5204T9, B6304T4, D4204T5
- Volvo XC60 (2009–)2010Nur Motor: B6304T2, B6324S
- Volvo XC60 (2009–)2011–2013Nur Motor: B6304T4, B6324S5
- Volvo XC60 (2009–)2014Nur Motor: B4204T10, B4204T11, B4204T12, B4204T15, B4204T9, B6304T4, B6324S5, D4204T5
- Volvo XC60 (2009–)2015Alle Motoren außer: B4204T7, B6324S4, D5204T3, D5204T7, D5244T11, D5244T12, D5244T15, D5244T17, D5244T23
- Volvo XC70 (2008–)2010Nur Motor: B6304T2, B6324S
- Volvo XC70 (2008–)2011–2013Nur Motor: B6304T4, B6324S5
- Volvo XC70 (2008–)2014–2015Nur Motor: B4204T11, B6304T4, B6324S5, D4204T5
- Volvo XC90 (2003–)2011–2014Nur Motor: B6324S5
Was bedeutet der Fehlercode?
After a long period switched off, the engine control module (ECM) compares the coolant temperature sensor value with the air, fuel and outside temperatures. If the sensor signal is too high in relation to these, the fault code is set.
Mögliche Ursachen
- Contact resistance in the connector
- Damaged engine temperature sensor
- Damaged coolant temperature sensor
Was Sie tun können
- 1Read the engine temperature sensor signal in live data with the engine running. An unreasonable value means a permanent fault, while a reasonable value means it is not active right now
- 2Check the connector at the engine temperature sensor for contact resistance and oxidation
- 3Check that the fuses are intact. If an engine heater has been fitted afterwards, the fault code may be set incorrectly
- 4Take care working in the engine bay, as the electric cooling fan can run even when the ignition is off
- 5If the connector is in order and the fault remains, have a workshop check or replace the sensor
Symptome, die Sie bemerken können5
- The Check engine light comes on or behaves abnormally
- The engine is difficult to start and cranks slowly on starting
- The engine idles unevenly
- The engine stalls while driving
- The electric cooling fan runs all the time
Was der Fehler beeinflussen kann3
- At start-up the intake air temperature is used if the intake sensor has no fault
- After start-up the engine temperature is calculated using a model
- The electric cooling fan runs at a predefined speed
Allgemeine Hinweise für Fahrzeughalter. Die Diagnose am Fahrzeug kann eine andere Ursache zeigen.